How do you clean a CPAP machine? Some parts may need daily cleaning if you feel they aren’t running as well. But, for the most part, the machine and parts might only need cleaning once, maybe twice a week.
The American Sleep Apnea Association recommends the following:
- CPAP masks: Every two days
- CPAP nasal pillows and mask cushions: After every use
- CPAP tubing or hose: Clean once a week and dry after every use
- Straps: Once a week
- CPAP hose connectors: Once a week
- Water chamber: Once a week
- Reusable CPAP filters: Once a week
Always follow the manufacturer’s cleaning instructions for your CPAP equipment. These may vary depending on your brand or type, such as a nasal mask, nasal pillow mask, or full-face mask.
Wipe the outside with a microfiber cloth for the actual machine. You can also do that in between uses if you notice extra dust or dirt you don’t want on the machine. Never place it in water since this can damage the motor.
Disassembling CPAP equipment
Unplug the machine first, then follow the manufacturer’s instructions for taking components apart. For example, need to empty the water chamber if yours has a humidifier.
Cleaning CPAP components
You can use diluted vinegar or water and a mild, unscented soap to clean your machine's parts. Cleaning everything actually takes only about five minutes. But you will need to soak your water chamber while you clean, and that will take about thirty minutes.
You can place the CPAP hose, hose connectors, mask, mask cushions, head straps, and chinstraps in the water to either soak or lightly clean and thoroughly rinse. Then, you can hang the hose (most often do so over their shower heads) to drip dry, while everything else can lay on a towel to air dry.
You can take those out of your filters and smack off any access buildup. However, every machine machine usually comes with one or two replacements. So, every two weeks, you can replace the filter altogether.